9L Industrial Water Cooling Chiller 110V CW-3000 Thermolysis Type for 60W 80W Laser Engraving Machine

Product Introduction: This water chiller is designed for cooling the spindle of the cnc engraving machine,applied to cool a single 80W or below CO2 laser tube (emitting rate lower than 60%). Package Content: 1 x CW3000 Water Chiller Machine; 1 x Power Cable; 1 x Connection Hose; 1 x Spare Fuse; 1 x User Manual; 1 x Alarm Signal Output Plug; 2 x Sealing Washer; Specification: CW-3000： Voltage: 110V Frequency: 50Hz Current: 0.45A Radiating capacity: 50W/℃ Tank capacity: 9L Maximum Pumping Lift: 10M Maximum Flow: 10L/min Protection: Flow alarm Inlet and outlet: External Dia.10mm brass connector Way of Circulation:Water pump forces circulation Cooling:Radiator that forces the wind cooling Fitment:Cool single 60W, 80W CO2 laser tubes Installation steps: 1.Open the package to check if the machine is intact and all the necessary accessories are completed. 2.Open the mouth screw on the top of machine, add cooling water (Please don't power the machine without water). 3.According to system conditions, connect the water isnlet and outlet pipe well. 4.Connect the power cable, turn the power switch (Note: Don't let the water overflow). 5.Check the radiator water level again (Keep the distance between water level and mouth is 80-150mm). Notice: 1.Cooling machine no use for long time or in transport must keep emptying the cooling water. 2.It is strictly forbidden to plug and run the cooler without feeding water. 3.Cooler should be placed in a well-ventilated, dry environment place and away from heat sources. 4.Please keep at least 30cm from obstructions to the air outlet which is in the back of the cooler, and should leave at least 10cm between obstructions and air inlets of two sides.

• Water chiller adopts brand-new imported famous brand compressors and large-flow high-lift special domain S&A water pumps, which are safe and environment-friendly, saving electricity and durability.
• Specification:CW-3000:Tank capacity: 9L;Cooling capacity:60W 80W Laser Engraving Machine;CW-5000:Tank capacity: 6L;Cooling capacity:800W;CW-5200:Tank capacity: 6L;Cooling capacity:1400W.
• Water chiller has professional forced air-cooled radiator,high heat dissipating capacity and not easy to be blocked,and equipped with alarm output port, can quickly protect sensitive components.
• Application:CW-3000:Cool a single 80W CO2 glass laser tube or below CO2 laser tube (emitting rate lower than 60%),and for 0.8KW / 1.5KW Spindle Cooling;CW-5000:Thermolysis Type Industrial Water Chiller is designed for cooling the one CO2 glass laser tube under 150W of the laser engraving and cutting machine. (Its emitting rate is higher than 60 %.);CW-5200:Thermolysis Type Industrial Water Chiller is designed for cooling the one CO2 glass laser tube 130W or 150W of the laser engraving.
• This economic water cooling equipment , a large thermolysis water cooler, can save energy , has long working life and operate simply.